diy tinsel photobooth backdrop

November 23 2011 |

We’re having our (2nd) annual Christmas party this year, so Mr. Lovely and I wanted to spice it up a bit with a photobooth!  I wanted to have a super-sparkly, borderline-tacky backdrop, so here’s what we came up with.  Wait ’til you see how easy it is.  Just grab this stuff:

  • an armful of tinsel garland (dollar stores are awesome for this!)
  • dowel or pole of some sort
  • twine
  • thin wire

Get your pole, curtain rod, or (like me) detach the handle from your broom.  No joke.  This is my broom handle.  Cut tinsel garland into 7-foot lengths.  Fold each length in half, and at the folded point, attach it to your broom handle by wrapping it with a small amount of wire.  Repeat this until your broom handle is full.

The next and last step is to tie a length of twine or rope to each end of the handle and hang it up on your wall.  It should be pretty lightweight — a single nail is holding this one just fine.

BOOM.  Backdrop.  Just make sure that when you and your buddies are taking photos of each other, you keep the photos within the edges of the tinsel so that it looks like it goes on forever (like the photos below!).  If you want to be able to take full length shots, just double up the length of your tinsel.  Have a ball!  xoxo

48 thoughts on “diy tinsel photobooth backdrop”

  1. You are so creative. You come with the neatest ideas. Have a great holiday . Are you coming home for any of the holidays. God Bless take care of each other. Love ya cuz.

  2. LOVE IT!I love the sparkle it gives to the pictures. fun! We’re thinking of having a holiday party again after a few years of not.. Might have to do this!

    1. Hi Katie,
      We shot inside at night with the lights on. I had my Canon 60D on a tripod with an attached flash. Camera settings were Auto ISO, F5.0, and shutter speed 1/50. Hope this helps!

  3. Aproximately how many feet of garland would you say this project takes? I have to buy the garland, an don’t want to buy too much or too little. Thanks!

    1. Hi AnnaKate! If I remember correctly, I think I used about 15 pieces of garland, each 7 feet in length. Those got folded in half, so the height of the backdrop was about 3.5 feet. Hope that helps!

Leave a Reply to Rebecca - A Daily Something Cancel reply

Keep the conversation going! Your email address will not be published.

*