Halloween Craft: Spider Paperweight

| | |

This creepy crawly Halloween craft is a cheeky little nod to spooky season! Create a spider paperweight for fun or as a unique Halloween gift.

Halloween craft
Halloween craft
DIY Resin Tarantula Halloween Paperweight

This project is cracking me up! I’m a big fan of working with resin and I think it’s so fun to dream up stuff to encase in it!

I was wandering around the Halloween section and saw these fuzzy fake tarantulas and thought how hilarious it would be to stick one on my mom’s nightstand and freak her out.

Then I thought twice because nobody wants to be responsible for their own mother’s heart attack, so I decided to put it in a paperweight on my own desk instead.

Psst — be sure to sign up below for my VIP group, and I’ll send more of my very best holiday and DIY ideas straight to ya!

Crafty Halloween Ideas

Crafting during the fall and Halloween time is so satisfying, isn’t it?

The autumn chill in the air always lights up my creative ideas.

If you’re looking for some fun Halloween crafts, here are our most popular ideas from the archive!

Alternative Ideas for Your Halloween Paperweight Craft

If the idea of a tarantula hanging out on your desk is just a little too creepy for your taste, there are lots of other ideas you could try!

Switch up this Halloween craft by adding different items to your paperweight instead.

You could sprinkle in some teeny tiny skulls (they come in black and white) or bones for fun.

Or to make it less “Halloween” and more “fall,” these little acrylic pumpkins would look really pretty floating in the resin. Maybe even add in some glitter for fun!

Supplies You’ll Need

Silicone Mold. This mold is traditionally used for soap but works perfectly for this project!

Fake Spiders. These have a furry look to them, but you can also use the plastic spiders that you might find in a toy section.

Resin Kit. I love this kit because it mixes well and comes out nice and clear!

Disposable Plastic Cups. For mixing your resin — you’ll want to discard these when you’re done.

Popsicle Sticks. For mixing, so have a few extra around!

Scissors.

How to Make a Paperweight Halloween Craft

DIY Resin Tarantula Halloween Paperweight
  1. Use the scissors to trim down the legs of your spider if they are taller than your mold cups. I recommend trimming them so that they end about 1/2″ below the top of the mold cup.
  2. Mix the resin and hardener according to the instructions on your packaging. If you use the same mold and resin that we listed above, you’ll need to use all of the resin and hardener. You’ll also need to mix it in larger cups than are provided in the kit.
  3. Pour about 1/4″ of resin into one of the molds.
  4. Sink your spider into the mold, being sure to put the top of the spider toward the top of the mold so that it looks upside-down to you.
  5. Pour in the remaining resin.
  6. Allow the resin to cure and harden according to packaging instructions.

How to Display Your Halloween Paperweight

Once it’s completely hardened, remove it from the silicone mold and enjoy!

You can set these on your own desk for fun, give them to teachers for a Halloween surprise, or set a bunch of ’em out at a party on the refreshments table to spook people out.

Mine is keeping my desk supplies company as we speak. xoxo

Halloween craft
DIY Resin Tarantula Halloween Paperweight
DIY Resin Tarantula Halloween Paperweight

Paperweight Halloween Craft

Yield: Halloween Paperweight
Active Time: 15 minutes
Additional Time: 1 day
Total Time: 1 day 15 minutes
Difficulty: Intermediate
Estimated Cost: $30

This creepy crawly Halloween craft is a cheeky little nod to spooky season! Create a spider paperweight for fun or as a unique Halloween gift.

Materials

  • Fake spider
  • Silicone mold
  • Resin kit
  • Disposable mixing cups
  • Popsicle sticks

Tools

  • Scissors

Instructions

  1. Use the scissors to trim down the legs of your spider if they are taller than your mold cups. I recommend trimming them so that they end about 1/2" below the top of the mold cup.
  2. Mix the resin and hardener according to the instructions on your packaging. If you use the same mold and resin that we listed above, you'll need to use all of the resin and hardener. You'll also need to mix it in larger cups than are provided in the kit.
  3. Pour about 1/4" of resin into one of the molds.
  4. Sink your spider into the mold, being sure to put the top of the spider toward the top of the mold so that it looks upside-down to you.
  5. Pour in the remaining resin.
  6. Allow the resin to cure and harden according to packaging instructions.

Notes

If the idea of a tarantula hanging out on your desk is just a little too creepy for your taste, there are lots of other ideas you could try!

Switch up this Halloween craft by adding different items to your paperweight instead.

You could sprinkle in some teeny tiny skulls (they come in black and white) or bones for fun.

Or to make it less "Halloween" and more "fall," these little acrylic pumpkins would look really pretty floating in the resin. Maybe even add in some glitter for fun!

This post contains affiliate links for your convenience. This means that I receive a small commission should you make a purchase via one of these links, at no additional cost to you. Thank you as always for your support!

Leave a Reply

Your email address will not be published. Required fields are marked *

9 Comments